Comtec/ Santana/ Capital Hardware

Frequently Asked Questions Q. This depends on several factors; each time you use your toilet the trip lever, flapper, and fill valve are operated. You will find, however, that the flapper and fill valve are the parts most exposed to water and will be the first ones to wear out in most cases. That depends on a number of variables and which parts. Water quality is one of the major factors. If your water source is heavily chlorinated then many parts won’t last long.

Toilet Paper Engine

Check that the hole in the floor is large enough to accommodate the closet flange up to its collar. If the hole needs to be enlarged, trace around the flange’s base with a pencil, then cut away the excess flooring with a jigsaw. Don’t cut any joists. Dry-fit the soil pipe into the closet bend.

Product Features Hangs over toilet tank or over door Multi-use utility hook for easy and.

No Credit Card Required 1. A gray water tank collects the water that goes down the drain of your RV shower and sinks. It is the presence of soap residue and dirt that give this waste its name and gray-ish look. However, we will not be discussing RV gray water tanks in this piece. The black water tank or RV waste tank collects both liquids and solids, so caring for it is a bit different than your gray tank.

In addition to human waste, the RV black tank also collects water used to flush the toilet, and of course, toilet paper. Well, think of your toilet at home. First, it keeps odors from permeating your living space, and second, having water in the bowl first, helps make sure any solids that enter the bowl can move along without sticking. You can also purchase in packet form, like the Walex Bio-Pak , available in a variety of styles and scents.

A holding tank chemical is an environmentally-safe liquid, that is added to the RV black water tank, to help break down waste and tissue, as well as to help control odors that build up in the tank.

HD Rooftop Satellite Television for RV

Test the flapper Push down on the flapper with a stick when you hear the water running and listen for it to stop. Check the fill valve for a leak Flush the toilet and look for a fill valve leak. Lift up on the float arm when the tank is filling to see if the water stops. If the fill valve still leaks, replace it Photo 3.

Toilet Parts & Repair. Gaskets, Washers & Seals Mounting Bolts & Bolt Caps; Toilet Flappers Toilet Flanges Glue attaches to bottom of Toilet and fins seal inside in. drain pipe. Product can be installed with no special tools. Get $5 off when you sign up for emails with savings and tips.

When I’m on the road, how do I find a service shop to repair my RV toilet? What do I do if my toilet bowl doesn’t hold water? This may take a little investigation on your part. If the toilet is new and has never held water, the closet bolts mounting the toilet to the floor might have been over tightened. If this is the case, simply loosen the closet bolt nuts. A special tool to clean the groove is available from Thetford and various dealerships. Water constantly runs or drips into my toilet’s bowl.

Toilet Seats & Repair Parts

December The purpose of this site is to describe the process involved with obtaining and installing a high capacity above 1. High capacity toilets are desirable for a variety of reasons, including more complete exchange of water in the basin, more effective cleaning of the sides of the basin, and in the case of washdown toilets, a smaller fouling region on sides of the basin and often a wider drain valve that is less likely to clog.

I am neither a plumber, nor a lawyer, so consult one of each before attempting anything described on this page. This page constitutes neither legal advice, nor plumbing advice, as I am not qualified to dispense either one. I used Home Depot part numbers on the shower page. So, in the interest of free market competition, I’m using Ace part numbers below.

Line your toilet up with the mounting flange and then bolt the toilet down while making sure not to over tighten the bolts as this could crack the toilet. Once you have got it bolted down, go ahead and hook your water supply lines back up and turn you water on to flush it so that you can check for any leaks.

Your product is great to work with, Your design and layouts and knowledge of ADA regulations is extremely helpful. Your product comes shipped promptly and perfectly packed. Your designs are easy to work with and makes installation much easier. Your customer service ranks in the tops of suppliers that I have dealt with in 22 years in business.

What great customer service this company has! They went out of their way to work with me to find the part that would fit correctly, even sending me samples to try a couple of times. I am a small customer with a small order, but they treated me like a VIP. Very easy site to navigate. Has a great choice of materials too. I would recommend this business to family, and friends.

Plumbing for a Toilet

Please take a look — we hope you enjoy perusing it as much as we enjoyed designing it. Elevate solid brass Capturing a perfect combination of sleek line styling with a chic minimalist look, the Elevate Suite will appeal to those who seek a clean shape. Go to suite page Bleu Rich in minimalist design, the Bleu Suite is a striking bath accessory designed to coordinate with virtually any bath or powder room decor.

Simple styling and strong, sleek lines make Bleu a most popular Suite.

Learn how to install a toilet or remove an old one quickly and correctly It may seem daunting, but with some time and the proper tools, you can install a toilet. This guide will teach you how to remove an old toilet and install a new one.

Today, they are widely known as “macerating toilets,” or more commonly, “upflush toilets,” but Saniflo invented, then perfected, the concept. Traditionally, toilets flush gravitationally, letting the water flow down, beneath the toilet, then to your stack. The Saniflo toilet system discharges out the back of the commode, and into a macerator, which is sitting inside a pump.

The pump then pumps the ground sewage up through PVC pipe, right to your existing stack. The benefit is that you can build a bathroom anywhere for a fraction of the cost of installing pipes. Saniflo also built their toilet system as true DIY installation with the goal of a four-hour installation. But does this really work? There are five main Saniflo toilets that make up the bulk of units in the market today:

Click for info on FREE SHIPPING

Doorless entry[ edit ] Modern public toilets may be designed with a labyrinth entrance doorless entry , which prevents the spread of disease that might otherwise occur when coming in contact with a door. Doorless entry provides visual privacy while simultaneously offering a measure of security by allowing the passage of sound. Doorless entry also helps deter vandalism; fewer audible clues to another person entering discourages some vandals.

Doorless entry may also be achieved simply by keeping an existing door propped open, closed only when necessary.

Toilet Cover Decoration,Anchor Decor,Digital Anchor Chain Icon Over Brick Wall Vintage Vessel Part Hook Up The Boat Theme,Tortilla Brown,3D Printing,W”xH”.

So I have found myself looking for tips on how to keep a toilet clean without using those blue water chemical tank things. So here is what I have found so far. It actually put a dent in the rust ring with out me even washing the toilet! A small bottle of vinegar! If you poke a hole into a bottle of vinegar and then put the whole bottle into your toilet tank the vinegar will prevent a toilet ring from forming and also use less water with every flush!

This idea has worked for some but not for others. In the comment section there is a discussion about alternative ideas and possibilites. If you drop a denture cleaning tab into the toilet before bed and then scrub the toilet in the morning it will be sparkly clean. Alternatively you can drop the denture cleaning tab into the back of the tank if you want it to clean when you flush.

Wet dry sand paper works really well for scrubbing stubborn stains! Do not use this on any of your other bathroom surfaces however as it will scratch the surface.

Toy Stuck in the Toilet? Here’s How to Get Them Out. Part 1 of 2

Have you ever seen an open toilet? What type of public place was it at? Was anyone using it?

Often handles are toilet parts that get loose or corroded and no longer pull the flap up or drop it back down properly. It’s an easy repair, but there’s a trick to getting the flush handle out. The retaining nut inside the tank is a reverse thread.

Introduction Disconnect the Supply Line After turning off the water at the shutoff, flush the toilet to remove most of the water from the tank and bowl. A little water will be left in the bowl. Use a force-cup plunger to force it down the drain line. Remove the remaining water from the tank with a sponge and a bucket. Disconnect the supply line from the base of the tank. Step 1 gently rock toilet back and forth to lift it free Remove the Old Toilet To remove the old toilet, pop off the trim caps at the base of the toilet.

Next, loosen and remove the nuts and washers on the closet bolts securing the bowl to the floor. If the nuts are rusted, you may need to cut them off with a hacksaw. If you’re working alone, disconnect the tank from the bowl before disconnecting and removing the bowl. Lifting the two pieces separately will be a lot easier.

Toilet Seats & Repair Parts

Fixing a Clogged Toilet 1 Shut the water off. If your toilet has become clogged, don’t try to flush it or you’ll risk overflowing the toilet. Find the water valve on the wall that connects the waterline to the toilet and turn it clockwise until it stops. Water should stop coming into the tank. With any tank or flushing issue, you’ll want to shut the water off first as a safety precaution.

Coming up on This Old House TOH S40 E Net-Zero Blanket | The Jamestown Net-Zero House. Identify parts and problems with this handy guide How to Fix a Leaky or Runny Toilet. Q: Our toilet rocks back and forth. How can we fix it? How to Install a New Toilet Flange.

Drill or Drill press and Drill bit Supplies: Glue sticks for the hot glue gun Small piece of sandpaper or file Additional items that come in handy especially if building with large groups: Trace-able templates for the cardboard parts made in step 2. Several crankshaft bending templates Instructions book Pre-cut and drilled dowels for the connecting rods. I had sandpaper, tape, hot glue sticks, and everything else laying around. Cut Out “Crankcase” Parts Plug your hot glue gun in, your going to need it in a minute!

Cut out the 4 main parts: Use the measurements found Picture 1 below. Also refer to Picture 4 to see what they look like before they are folded. These pieces are all cut out of the same thickness corrugated cardboard.

How To Install A Toilet Part 2 of 3